Product Description

Milwaukee M18FMTIW2F12-502C 18V 5.0Ah Li-Ion Brushless Cordless 1/2" Mid-Torque Impact Wrench with Friction Ring Combo Kit
Milwaukee M18FMTIW2F12-0 18V 5.0Ah Li-Ion Brushless Cordless 1/2" Mid-Torque Impact Wrench with Friction Ring
The M18 FUEL 1/2" Mid-Torque Impact Wrench with Friction Ring delivers access in tight spaces, up to 881 Nm of nut-busting torque, and maximum power to weight ratio. This battery-powered impact wrench weighs only 1.58 kg, making it extremely versatile, capable of performing a wide variety of applications. A POWERSTATE Brushless Motor provides the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. The MILWAUKEE 1/2" Mid-Torque Impact Wrench with Friction Ring is only 152 mm in length, providing users access to stubborn fasteners where larger impact wrenches cannot fit without needing to disassemble components to reach bolts. Tri-LEDs that surround the anvil to deliver the user brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers enhanced precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, Auto Shut-Off Mode applies no more than 48 Nm of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Mode, where the tool delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK PLUS Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18 REDLITHIUM-ION battery pack (not included) fits all M18 tools, delivering more work per charge and more work over the life of the pack.

Features:

Friction ring ensures quick and easy socket changes POWERSTATE
Brushless Motor delivers up to 881 Nm of nut-busting torque
4-Mode DRIVE CONTROL provides control over output speed and power
Auto Shut-Off Mode prevents over-tightening and increases productivity by applying no more than 48 Nm of torque
Bolt Removal mode delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops
152 mm in length for maximum access in tight spaces
Tri-LEDs deliver high definition lighting to increase workspace visibility with fewer shadows
Works in up to 69kV environments
REDLINK PLUS Intelligence ensures maximum performance and protects from overloads, heating and over-discharge
Specifications:

Voltage: 18V
Anvil Type: 1/2" Square with Friction Ring
Fastening Torque: 746 Nm
Nut-Busting Torque: 881 Nm
DRIVE CONTROL: 4-Mode with Auto Shut-Off Mode & Bolt Removal Mode
RPM: 0 – 1,250 / 0 – 1,950 / 0 – 2,575 / 0 – 2,575
IPM: 0 – 900 / 0 – 2,100 / 0 – 3,100 / 0 – 3,100
Length: 152 mm
Weight (Tool only): 1.58 kg
Warranty:

5 Year Warrranty as covered by Milwaukee Australia.
Milwaukee M18B5 18V 5.0Ah Li-Ion RED LITHIUM Battery
The M18 5.0Ah REDLITHIUM-ION BATTERY features superior pack construction, electronics, and performance to deliver more work per charge and more work over the life of the pack than any battery on the market. M18 5.0Ah REDLITHIUM-ION BATTERY features an advanced design, protecting the pack against harsh jobsite environments. This protection routes water away from the electronics and out of the battery pack, extends run-time and life by minimizing heat, and prevents pack failures from vibration or drops.

This unique to Milwaukee design also allows the battery to operate in extreme cold weather conditions (below -180C). Managed by Milwaukee’s exclusive REDLINK Intelligence, the battery features overload protection to prevent you from damaging your cordless power tools in heavy-duty situations, while the discharge protection prevents cell damage.

Features:

Powers more than 100 Milwaukee M18 cordless power tools
REDLINK intelligence provides optimised performance and over load protection
Best in class construction - offers long lasting performance and durability
Fuel gauge on board displays remaining run time for less down time on the job
All weather performance, delivers fade free power in extreme jobsite conditions
Specifications:

Voltage: 18V
Capacity: 5.0Ah
Charge time:
M12-18FC: 60 mins
M12-18C: 105 mins
Weight: 0.72kg
Warranty:

2 Years Warranty Covered By Milwaukee Australia
Milwaukee M12-18FC 12V - 18V Multi Voltage Rapid Battery Charger
Once again, Milwaukee is on the ball for providing the fastest charging solutions for tradies. With the ever-growing demand to charge batteries in both voltages, the new and improved multi voltage charger, M12-18FC, can sequencial charge a 12V or 18V battery up to 40% faster, increasing your productivity on the worksite.

Features:

Charges all Milwaukee batteries up to 40% faster
Charges all M12 and M18 batteries
Sequencial charging
REDLINK intelligence communicates directly with the battery
REDLINK monitors cell voltage and temperature
REDLINK charges to optimise the performance, protect and extend the life of the battery
Specifications:

Voltage: 12V & 18V
Battery type: Li-ion
Charge Time:
2.0Ah: 26 minutes
4.0Ah: 47 minutes
5.0Ah: 59 minutes
6.0Ah: 75 minutes
9.0Ah: 90 minutes
Weight: 0.77kg
Warranty:

2 Years Warranty Covered

Payment Terms︰ TT/WU/BTC