Makita DK0103X1 18V/12V Max 5.0Ah/1.5Ah Li-ion Cordless 3pce Combo Kit
Makita DFR450ZX 18V LXT Li-Ion Cordless Mobile Auto Feed Screwdriver - Skin Only
Features:
Makita built 4-pole motor design with dual steel bearings provides maximum torque
Increased rotational speed ensuring smooth screw driving
Tool-less stopper base adjustment
New silent clutch features high durability with direct drive transmission in reverse rotation
Reversing switch
Specifications:
Voltage: 18V
Drive Shank: 6.35mm(1/4") Hex
No Load Speed: 4,000rpm
Length: 424mm
Capacity: ⌀4mm x 25-41mm
Weight: 2.3kg
Warranty:
3 Years Warranty Covered By Makita Australia
Makita DTD152Z 18V Li-Ion Cordless Impact Driver - Skin Only
The new Makita DTD152Z is a compact 18V Impact Driver to replace its predecessor DTD146Z. Comparing the two models, the DTD152Z is more compact in size, lightweight and features high rotation speed. The DTD152Z is designed to suit the needs of carpenters, plumbers, electricians and kitchen fitters for applications such as tightening or drilling screws.
Features:
Aluminium hammer case – hammer casing has been designed to be light weight and robust
One touch installation – driving shank has been designed so that the collar does not have to be pulled back when installing a new bit, only when removing the bit
LED job light – twin LED job light with pre glow and afterglow functions
Compact design – unit design has been reduced to 137mm
Ergonomic design – the grip has been designed to provide comfortable grip and more control while minimising hand fatigue
XPT eXtreme Protection Technology – significantly increasing the protection
Specifications:
Voltage: 18V
Driving shank: 6.35mm
Impacts per minute: 0-3500rpm
No load speed: 0-2900rpm
Max tightening torque: 165Nm
Weight: 1.5kg
Warranty:
3 Year Warranty with Makita Australia
Makita SK105DZ 12V Max CXT Li-ion Cordless Red Cross Line Laser - Skin Only
The 12V Max Red Cross Line Laser, SK105DZ, projects 2 lines both horizontal and vertical, ideal for a variety of marking out tasks. It also features 2 Brightness modes: Bright & Eco, a pendulum lock ideal for transportation and 3 modes of operation: Horizontal, Vertical & Cross Line.
The SK105DZ has a visable distance range of 20m and is accurate to within ±3mm at 10m. With up to 40 hour runtime, there is more then enough time to get you through the work day. The XPT technology provides an IP54 rating which makes the SK105DZ dust and moisture resistant.
Includes:
1 x Red laser target plate
1 x Magnetic wall mount
1 x Carry bag
Features:
Laser projects 1 horizontal line and 1 vertical line a intersecting at 90°
Red laser provides bright laser beam projection visible at a distance of up to 20 metres
XPT for use in outdoor applications or harsh environments, protection from dust and dripping water is enhanced
Laser can be emitted in 2 different brightness settings, Eco and High brightness
Line beam can be emitted in 3 modes, horizontal only / vertical only and horizontal and vertical crossline
CXT powered by 12V Max batteries (sold separately) the laser has a extended continuous runtime of up to 21 hours on maximum power
DC jack allows power to be supplied from 18V batteries using USB adaptor ADP05 and power supply cable (sold seperately)
Specifications:
Voltage: 12V
Diameter of laser point: 2.0mm at 5m
Range: 20m
Self leveling range: ±4°
Measuring tolerance: ±3mm at 10m
Operating temperature range: -10° to 50°C
Continuous runtime: up to 40 hours
Length: 138mm
Weight: 0.46kg
Warranty:
3 Years Warranty Covered By Makita Australia
Makita BL1850B-L 18V 5.0Ah Li-ion Cordless Battery with Gauge
The Makita 18V LXT Li-ion 5.0Ah battery, BL1850B-L, charges faster and works longer than standard Li-ion batteries, giving you and your cordless tools unmatched performance and productivity to take on the most demanding applications.
The Makita 5.0Ah battery combines more run time (66% more run time per charge than the Makita BL1830 3.0Ah battery) with a category-leading charge time of only 45 minutes, so it spends more time working and less time sitting on the charger. For added convenience, it also features an L.E.D. charge level indicator to monitor battery charge. The BL1850B-L resists self-discharge so it is ready for use even after long periods of little to no useage.
Features:
Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
Up to 66% more run time per charge compared to BL1830
Fast 45 minute charging time
Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
Battery resists self-discharge and remains ready for use even after long periods of storage
Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
Star protection computer controls - includes overload protection, over-discharge protection and over heat protection
The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating
Specifications:
Voltage: 18V
Amp hour: 5.0Ah
Cell type: Lithium-Ion
Charging time: 45 minutes
Weight: 0.6kg
Warranty:
2 Years Warranty Covered By Makita Australia
Makita BL1016-L 12V Max 1.5Ah Li-ion CXT Cordless Slide Battery
The New Makita 12V Max platform has developed and introduced the slide style batteries to their sub-compact 12V tool range, unlike the cassette style batteries from previous models. The 12V Max slide batteries offer improved high-capacity, ease of use and durability like, styled like the 18V range.
The benefits of slide type over cassette type batteries are a more stable contact between battery and tool - multiple contact points ensure stable connection even with the tool under extreme vibration, same ergonomic design as 18V LXT products, and battery terminals are protected from shorting out when thrown into tool bags.
Using a slide battery allows the 12V Max range of tools to have a more slender, ergonomically designed handles - smaller and more comfortable than handles of cassette style batteries which have to be designed around the battery.
Features:
Unbelievable 22 minute charge time
Newly designed 12V MAX slide type battery platform
CXT - Compact eXtreme Technology
Compact and lightweight design
Specifications:
Voltage: 12V Max
Amp Hour: 1.5Ah
Cell type: Lithium-Ion
Charging time:
DC10SB: 22 minutes
DC10WD: 50 minutes
Warranty:
2 Years Warranty Covered By Makita Australia
Makita DC18RE 12V-18V Li-ion Rapid 2 Port Multi Charger
Features:
Ability to charge both 18V LXT and 12V MAX CXT battery platforms
Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
Forced air cooling fan - cools the battery to minimise charging time
LED power display identifies the condition of the battery and charging condition
Rapid Charge - Selects the optimum voltage, current and temperature for reduced charge time
Compact Design - Designed around the current single port charger an additional charging port has been added with the overall length only 12mm longer
Specifications:
Voltage: 12V MAX & 18V
Cell capacity: 1.5Ah - 6.0Ah
Charge times:
12V Batteries:
1.5Ah: 22 mins
2.0Ah: 30 mins
4.0Ah: 60 mins
18V Batteries:
1.5Ah: 15 mins
3.0Ah: 22 mins
4.0Ah: 36 mins
5.0Ah: 45 mins
6.0Ah: 55 mins
Dimensions (L x W x H): 280mm x 180mm x 130mm
Warranty:
2 Years Warranty Covered By Makita Australia
Makita 821552-6 Makpac Connector Carry Case System - Type 4
The Makita MAKPAC connector case system designed for the professional. Strong and collapsible carry handles make the connector cases easy to move and store. Rounded grips make it easy to remove the individual cases. The MAKPAC connector case system consists of four cases varying in height. The cases can be stacked on top of each other and locked together with the locking latches. The interconnected cases take up less storage space and are easy to transport to and from the work site.
Features:
Stackable for storage and easy transportation
Strong and collapsible handles
Four different sizes to choose from
To suit:
Makita 5008MG 1800W 210mm (8-1/4") Circular Saw
Makita BHR242/DHR242 18V Li-Ion SDS Plus Brushless Rotary Hammer Drill
Makita BHR243/DHR243 18V Li-ion Cordless Brushless SDS Plus Rotary Hammer
Makita BHR262 18V Li-Ion SDS Plus Brushless Rotary Hammer Drill
Makita HR262T 36V Li-Ion Rotary Hammer Drill
Makita RP1800 1850W 12mm (1/2") Plunge Router
Makita RP2301FC 2100W 12mm Plunge Router
Makita RT0700C 710W 6.35mm (1/4") Router
Makita SP6000 1300W 165mm (6-1/2") Plunge Cut Circular Saw
Specifications:
Type: 4
Dimensions (L x W x H): 395mm x 295mm x 315mm
Weight: 2.3kg |
|
|
|
Product Image
|
