Makita DLX2368TJ 18V 5.0Ah Li-ion Cordless Brushless 2pce Combo Kit
Makita DRV250Z 18V Li-ion Cordless Brushless 6.4mm Riveter - Skin Only
The Makita 18V Li-ion Cordless Brushless 6.4mm Riveter, DRV250, is a powerful cordless solution for heavy duty riveting tasks and has been specifically designed for industrial applications. Designed with a Brushless Motor, the DRV250 delivers a powerful pulling force of 20kN with a stroke length of 30mm. The DRV250 also has a short center height of only 26mm, allowing it to be used in tight and narrow working spaces.
The DRV250 includes various features which make it a powerful yet easy tool to use, built with a rivet holding mechanism as well as a transparent mandrel box, allowing for clear visual monitoring of the amount of mandrel collected.
Includes:
1 x 6.4mm accessory set (191F78-1)
1 x 6.0mm accessory set (199725-2)
1 x 4.8mm accessory set B (191C03-4)
1 x Grease (191D57-7)
1 x Belt hook (346317-0)
Features:
Adjustable rivet diameters the DRV250 is capable of pulling rivets up to 6.4mm (1/4”) including 6.0mm (1/4”), 4.8mm (3/16”), 4.0mm (5/32”), 3.2mm (1/8”) and 2.4mm (3/32”)
Rivet holding mechanism in the nose piece holds the rivet in place even when working on flat surfaces, preventing the rivet from falling out. Increasing safety and convenience
After engaging the switch trigger the LED joblight will illuminate and remain on for approximately 10 seconds after the switch is released
Short center height between the top of the tool housing and the centre of the nose cone is only 26mm allows the user to position the head comfortably in tight and narrow places
Transparent mandrel box - after installing the rivet, eject the broken off mandrel into the transparent mandrel box by tilting the tool backwards. The box catches each mandrel and the user can see once the container is full and needs to be emptied
Specifications:
Voltage: 18V
Pulling force: 20kN (4496lbs)
Stroke: 30mm
Sound pressure level: 74dB
Vibration: 2.5m/s²
Length: 323mm
Weight: 2.1kg
Warranty:
3 Years Warranty Covered By Makita Australia
Makita DHP484Z 18V Li-ion Cordless Brushless Heavy Duty Hammer Driver Drill - Skin Only
The Makita DHP484Z Brushless Hammer Driver Drill is the successor to the popular DHP480Z model.
Features:
21 Torque settings
Single sleeve keyless chuck allows for easy bit installation/removal by one hand
Twin LED job light with preglow and afterglow functions
Variable speed controlled by trigger
Compact overall length at only 182mm
Mechanical 2-speed gearing
Best possible ergonomic handle with soft grip for driver drill applications
Specifications:
Voltage: 18V
Capacity:
Steel: 13mm
Wood: 38mm
Masonry: 13mm
Impacts per minute:
Hi: 0 - 30,000ipm
Lo: 0 - 7500ipm
No load speed:
Hi: 0 - 2000rpm
Lo: 0 - 500rpm
Max fastening torque:
Hard: 54Nm
Soft: 30Nm
Dimensions (L x W x H): 182mm x 79mm x 261mm
Weight: 1.6kg
Warranty:
3 Years Warranty Covered By Makita Australia
Makita BL1850B-L 18V 5.0Ah Li-ion Cordless Battery with Gauge
The Makita 18V LXT Li-ion 5.0Ah battery, BL1850B-L, charges faster and works longer than standard Li-ion batteries, giving you and your cordless tools unmatched performance and productivity to take on the most demanding applications.
The Makita 5.0Ah battery combines more run time (66% more run time per charge than the Makita BL1830 3.0Ah battery) with a category-leading charge time of only 45 minutes, so it spends more time working and less time sitting on the charger. For added convenience, it also features an L.E.D. charge level indicator to monitor battery charge. The BL1850B-L resists self-discharge so it is ready for use even after long periods of little to no useage.
Features:
Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
Up to 66% more run time per charge compared to BL1830
Fast 45 minute charging time
Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
Battery resists self-discharge and remains ready for use even after long periods of storage
Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
Star protection computer controls - includes overload protection, over-discharge protection and over heat protection
The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating
Specifications:
Voltage: 18V
Amp hour: 5.0Ah
Cell type: Lithium-Ion
Charging time: 45 minutes
Weight: 0.6kg
Warranty:
2 Years Warranty Covered By Makita Australia
Makita DC18RC 18V Li-Ion Cordless Battery Fast Charger
Features:
Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
Forced air cooling fan - cools the battery to minimise charging time
Digital power display identifies the condition of the battery and charging condition
Specifications:
Voltage: 18V
Cell capacity: 1.5Ah - 6.0Ah
Charge Time:
1.5Ah: 15mins
3.0Ah: 22mins
4.0Ah: 36mins
5.0Ah: 45mins
6.0Ah: 55mins
Length: 185mm
Weight: 0.82kg
Warranty:
2 Years Warranty Covered By Makita Australia
Makita 821551-8 Makpac Connector Carry Case System - Type 3
The Makita MAKPAC connector case system designed for the professional. Strong and collapsible carry handles make the connector cases easy to move and store. Rounded grips make it easy to remove the individual cases. The MAKPAC connector case system consists of four cases varying in height. The cases can be stacked on top of each other and locked together with the locking latches. The interconnected cases take up less storage space and are easy to transport to and from the work site.
Features:
Stackable for storage and easy transportation
Strong and collapsible handles
Four different sizes to choose from
Specifications:
Type: 3
Dimensions (L x W x H): 395mm x 295mm x 210mm
Weight: 1.9kg
|
|
|
|
Product Image
|
