|
|
|
|
|
|
|
|
|
|
|
|
|
Festool CXS LI 2,6 Set (564540) 10.8V 2.6Ah Li-ion Cordless Drill Driver Combo K
|
|
| Model No.︰ | CXS LI 2,6 Set |
| Brand Name︰ | Festool |
| Country of Origin︰ | South Africa |
| Unit Price︰ | US $ 120 / sets |
| Minimum Order︰ | 10 sets |
|
|
|
|
|
|
|
Festool CXS LI 2,6 Set (564540) 10.8V 2.6Ah Li-ion Cordless Drill Driver Combo Kit
Festool CXS Mini 10.8V Li-ion Cordless Drill Driver - Skin Only - CXS Mini
The CXS Compact cordless drill is the smallest drill in the Festool range. It's handy shape makes it ideal for working in cramped spaces. Featuring the FastFix chuck system, the CXS can be used with the Centrotec chuck, keyless chuck, or a right angle attachment that allows you to access even the tightest spaces. As you would expect, the CXS features exceptional ergonomics, with a battery design that removes the bulk from the handle, ensuring maximum comfort over extended use. Weighing in less than 1kg with the Centrotec chuck attached, the CXS will not leave you feeling fatigued even after all day use. The CXS offers exceptional battery life and an ultra low recharge time, fully recharging in just 30 minutes.
Features:
The compact design makes work easier in cramped spaces
The Fastfix chuck system allows quick changes between the compact Centrotec, keyless and angle chucks
The CENTROTEC quick change system takes the place of chucks and bit holders and speeds up tool change when drilling, countersinking and driving
A light 900g package with impressive ergonomics ensure comfort all day long
Optimum lighting: with the built in LED light you can keep working even in dark corners
Integrated bit storage puts four bits at your finger tips for extra convenience
Applications:
Kitchen fitting & furniture assembly
Attaching fittings and installing locks
Electrical installations
Frequent overhead work
Fitting curtain rails and skirting boards
Vehicle interior fit out work
Specifications:
Voltage: 10.8V
Chuck range: 1mm - 10mm
Bit holder: Centrotec
No-load speed:
1st Gear: 0 - 430rpm
2nd Gear: 0 - 1300rpm
Torque adjustment: 0.3Nm - 3.4Nm
Max torque:
Wood: 10Nm
Steel: 16Nm
Max drilling diameter:
Wood: 12mm
Steel: 8mm
Weight: 0.9kg
Warranty:
36 Month Warranty Covered By Festool Australia via Registration
Festool BP-XS 2.6 Ah Li-Ion 10.8V Li-Ion 2.6Amph Cordless Battery - BP-XS 2.6 Ah Li-Ion
Innovative battery technology brings power and flexibility to your cordless tools with Festool's range of battery packs. Long lasting, and measurably superior to other cordless tools. Now you can achieve perfect results quickly and easily with the quality you expect, even when you’re not near an electrical outlet.
Specifications:
Voltage: 10.8V
Capacity: 2.6Ah
Weight: 0.2kg
Warranty:
36 Month Warranty Covered By Festool Australia via Registration
Festool MXC 10.8V 2.8Ah Li-Ion Battery Charger - MXC
Battery charger for use with Festool's range of CXS Cordless Drills. Safe and efficient, the MXC features intelligent monitoring electronics that protect the charging battery from being overcharged or charged in hazardous conditions. MXC can quick charge a battery in approximately 20 minutes and provide a full charge in approximately 30 minutes.
Specifications:
Voltage: 10.8V
Input voltage: 240V
Charging current: 2.8A
Weight: 0.6kg
Warranty:
36 Month Warranty Covered By Festool Australia via Registration
Festool 499949 FastFix 10 mm Compact Keyless Chuck - 499949
Switch between functions in seconds with the FastFix interface, saving time and eliminating the cost of dedicated, single purpose tools. The Fastfix 10 mm compact keyless chuck features a clamping range 1 - 10 mm.
Specifications:
Clamping range: 1mm - 10mm
Festool 492135Centrotec Drill Chuck - 492135
Switch between drill and driving functions in seconds with the FastFix interface, saving time and eliminating the cost of dedicated, single purpose tools. The Festool FastFix based Centrotec Chuck is extremely lightweight and compact. This quick release chuck provides two points of contact for Centrotec bits, allowing them to extend directly into the drill spindle so they serves as an extension of the motor, significantly improving controllability and torque. Reduce fatigue with the lightweight Centrotec chuck and decrease necessary drilling/driving clearance with the compact design. Save time changing between drill and screw bits with the quick-change Centrotec System.
Accessory Centrotec bits can be used both with the Centrotec chuck as well as non-Festool standard bit holders and chucks. Works with all existing and previous model Festool drills equipped with FastFix interface for tool less change of chucks: T+3, C12, TDK, TDD, CDD models.
Festool 497951Fastfix Right Angle Chuck Attachment for XS Series - 497951
Right angle chuck for CXS and TXS compact cordless drills. Switch between functions in seconds with the FastFix interface, saving time and eliminating cost of dedicated, single purpose tools. The Right Angle Chuck is the ultimate solution for close quarters hole or fastener placement. Drill or drive between studs, joists, cabinet or drawer spaces, or virtually any constrained space without switching over to a separate, dedicated tool. This chuck attachment accepts Festool Centrotec or keyless chuck. Chuck rotates 360 degrees with 16 presets. Getting the job done right the first time eliminates waste of material and fasteners and saves valuable time. |
|
|
|
Product Image
|
|
|
Related Products
|
|
|
|
|
|
|
|
