Makita DTD152RTE 18V 5.0Ah Li-ion Cordless Impact Driver Combo Kit
Makita DTD152Z 18V LXT Li-Ion Cordless Impact Driver - Skin Only - DTD152Z
The new Makita DTD152Z is a compact 18V Impact Driver to replace its predecessor DTD146Z. Comparing the two models, the DTD152Z is more compact in size, lightweight and features high rotation speed. The DTD152Z is designed to suit the needs of carpenters, plumbers, electricians and kitchen fitters for applications such as tightening or drilling screws.
Features:
Aluminium hammer case – hammer casing has been designed to be light weight and robust
One touch installation – driving shank has been designed so that the collar does not have to be pulled back when installing a new bit, only when removing the bit
LED job light – twin LED job light with pre glow and afterglow functions
Compact design – unit design has been reduced to 137mm
Ergonomic design – the grip has been designed to provide comfortable grip and more control while minimising hand fatigue
XPT eXtreme Protection Technology – significantly increasing the protection
Specifications:
Voltage: 18V
Driving shank: 6.35mm
Impacts per minute: 0-3500rpm
No load speed: 0-2900rpm
Max tightening torque: 165Nm
Weight: 1.5kg
Makita BL1850B-L 18V 5.0Ah Li-ion Cordless Battery with Gauge - BL1850B-L
The Makita 18V LXT Li-ion 5.0Ah battery, BL1850B-L, charges faster and works longer than standard Li-ion batteries, giving you and your cordless tools unmatched performance and productivity to take on the most demanding applications.
The Makita 5.0Ah battery combines more run time (66% more run time per charge than the Makita BL1830 3.0Ah battery) with a category-leading charge time of only 45 minutes, so it spends more time working and less time sitting on the charger. For added convenience, it also features an L.E.D. charge level indicator to monitor battery charge. The BL1850B-L resists self-discharge so it is ready for use even after long periods of little to no useage.
Features:
Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
Up to 66% more run time per charge compared to BL1830
Fast 45 minute charging time
Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
Battery resists self-discharge and remains ready for use even after long periods of storage
Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
Star protection computer controls - includes overload protection, over-discharge protection and over heat protection
The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating
Specifications:
Voltage: 18V
Amp hour: 5.0Ah
Cell type: Lithium-Ion
Charging time: 45 minutes
Weight: 0.6kg
Makita 18V Li-ion Cordless Battery Fast Charger - DC18RC
Features:
Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
Forced air cooling fan - cools the battery to minimise charging time
Digital power display identifies the condition of the battery and charging condition
Specifications:
Voltage: 18V
Cell capacity: 1.5Ah - 6.0Ah
Charge Time:
1.5Ah: 15mins
3.0Ah: 22mins
4.0Ah: 36mins
5.0Ah: 45mins
6.0Ah: 55mins
Length: 185mm
Weight: 0.82kg
Warranty:
2 Years Warranty Covered By Makita Australia
Makita 18V Brushless Compact Single Case
Features:
Heavy Duty polyethylene constructed carrying case
Can fit 1 x Tool, 2 x Batteries, 1 x Charger |
|
|
|
Product Image
|
