Makita DLX1301GX1 18V 6.0Ah Li-ion Cordless 13pce Combo Kit Including Brushless
Makita DHP486Z 18V Li-Ion Cordless Brushless Heavy Duty Hammer Driver Drill - Skin Only
The 18V Brushless Hammer Driver Drill (DHP486) provides 141Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications. Not only has the performance on this model been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the previous model. Making it the most compact drill in its class and extremely comfortable to use in all applications.
Features:
Massive drilling capacity with 152mm hole saw & 50mm auger bit capacity
Compact overall length only 178mm for use in narrow workspaces
High powered brushless motor produces 141Nm peak torque
High durability aluminum gear housing
Mechanical 2 speed gearing with all metal gear construction
Specifications:
Voltage: 18V
Max Drilling Capacities in Wood:
Auger Bit: 50mm
Self-feeding Bit: 76mm
Hole Saw: 152mm
Max Drilling Capacities in Steel: 13mm
Max Drilling Capacities in Masonry: 16mm
No Load Speed:
Hi: 0 - 2100rpm
Lo: 0 - 550rpm
Impact Rate:
Hi: 0 - 31500ipm
Lo: 0 - 8250ipm
Max Peak Torque: 141Nm
Max Tightening Torque:
Hard: 130Nm
Soft: 65Nm
Dimensions (L x W x H): 320mm x 130mm x 205mm
Weight: 2.1kg
Warranty:
3 Years Warranty Covered By Makita Australia
Makita DTD171Z 18V Li-ion Cordless Brushless 4-Stage Impact Driver - Skin Only
The Makita 18V Li-ion Cordless Impact Driver, DTD171, offers users four speed settings, as well as 4 specifically designed fastening modes for optimum control. The impact drivers electronic controls find the best balance of speed and torque for each application for more efficient fastening. The 4-speed power selection switch provides the user with precise fastening control for a range of applications, from cabinet screws to lag bolts.
Features:
4 Stages of impact selection plus two T-Modes, A-Mode and bolt mode
On-the-go single hand impact selection button
Impressive 180Nm of max. fastening torque
XPT technology that protects against dust & moisture
Ultra compact design with twin dual side LED lights
Specifications:
Voltage: 18V
Drive shank: 6.35mm (1/4") Hex
Max tightening torque: 180Nm
No load speed:
Max: 0 - 3600rpm
Hard: 0 - 3200rpm
Med: 0 - 2100rpm
Soft: 0 - 1100rpm
Impact rate:
Max: 0 - 3800ipm
Hard: 0 - 3600ipm
Med: 0 - 2600ipm
Soft: 0 - 1100ipm
Max capacity:
Standard bolt: M5 - M16
High tensile bolt: M5 - M14
Length: 116mm
Weight: 1kg
Warranty:
3 Years Warranty Covered By Makita Australia
Makita DGA504Z 18V Li-ion Cordless 125mm (5") Brushless Angle Grinder - Skin Only
Features:
Easy to hold grip design with rubber for anti-skid
Worlds deepest concrete cutting mobile angle grinder at a depth of 20mm
Excellent performance - as powerful as AC model
Gear housing can be rotated to suit most cutting and grinding applications
Automatic speed control changes the cutting speed according to load condition for an optimum operation
Removable dust cover
Anti-restart function prevents accidental startup for safety even if the machien is plugged to powersorce with the lock-on switch on
Extreme protection technology for use in outdoor applications or harsh environments, protection from dust and dripping water is enhanced
Specifications:
Voltage: 18V
Wheel diameter: 125mm
No load speed: 8,500rpm
Dimensions (L x W x H): 362mm x 140mm x 145mm
Weight: 2.1kg
Makita DHR242Z 18V Li-Ion SDS Plus Brushless Rotary Hammer Drill - Skin Only
These genuine Makita 18 Volt Rotary Hammer drills from the LXT range feature a Brushless DC Motor which helps reduce energy loss by 30% compared to that of a 'brushed' rotary hammer. The one-touch sliding SDS plus chuck ensures easy bit changing. A 3 mode operation system makes these rotary hammers a must have the serious trades person. The angle positioning mechanism allows a chisel bit to rotate a full 360 degrees with 40 different locking positions makes this tool is as versatile as it is tough. Also features variable speed trigger, torque limiter, ergonomic & comfortable handle, and vibration absorbing design.
Features:
Brushless DC motor helps to reduce energy loss by 30%
One touch sliding SDS Plus type chuck
Variable speed control by trigger
Torque limiter
Easy to grip handle ergonomically designed to provide a sure and comfortable grip in any application
Natural position on mode selector provides 40 different bit angle settings
3 mode operation:- Rotation+Hammering, Hammering only, Rotation only
Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimising battery failures
The tool body is separated into the upper and lower housings with vibration absorbing cushion rubbers
Specifications:
Voltage: 18V
Drive shank: SDS Plus
Impact rate: 0 -4700ipm
Joules: 2.0J
No load speed: 0 - 950rpm
Max capacity:
Concrete: 24mm
Steel: 13mm
Wood: 27mm
Vibration: 13.5m/s²
Length: 328mm
Weight: 3.3kg
Warranty:
3 Years Warranty Covered By Makita Australia
Makita DHS680Z 18V LXT Li-Ion 165mm (6-1/2") Brushless Cordless Circular Saw - Skin Only
The new Makita 18V Circular Saw DHS680Z features a powerful brushless DC motor, making it out preform previous models with durability and performance. Compatible with all 18V batteries, its compact and lightweight design makes it the ideal circular saw for any jobsite or DIY handyman.
Features:
Powerful Brushless DC motor (BLDC)
Automatic Torque Drive; automatically increases motor torque according to load conditions
Magnesium base with 45 and 50 degrees bevel cutting capacity
Compact and lightweight design
Rear dust exhaust port
Twin LED job light with pre-glow
LED indicator panel with 3 indicators for: Battery Fuel Gauge, Automatic Torque Drive and Overload Protection
Tool hanger for hanging on a ladder or rafter
Large lock off lever easily operated even with a gloved hand
Compatible with all 18V Li-ion Batteries
Specifications:
Voltage: 18V
No Load Speed: 5,000rpm
Bevel Capacity: 50º
Blade Diameter: 165mm
Max Cutting Capacities:
0º: 57mm
45º: 41mm
50º: 37mm
Weight: 3.3kg
Length: 350mm
Warranty:
3 Years Warranty Covered By Makita Australia
Makita DJR187Z 18V Li-ion Cordless Brushless Reciprocating Saw - Skin Only
Introducing Makita's first Brushless Reciprocating Saw, DJR187Z, provides the user with more power and longer run times than the previous non-brushless models. Makita have redesigned the crank mechanism to reduce vibrations transferred to the user. the DJR187Z is designed to suit the needs of carpenters, plumbers, electricians and tradies that require a powerful tool to cut through materials such as timber, metal and PVC.
Features:
LED Joblight – with pre-glow and after-glow function
Tool-less blade change – simply insert the blade for installation. Removal can be done with single action no need to touch the blade
Tool-less shoe adjustment – lever system has been designed instead of the button system allowing easier adjustment
Sky hook – retractable hook located on side of the tool housing
Electronic 2 speed – conveniently located slide switch allows easy change between high and low speed
Brushless motor – more power and longer run time then normal brushed motors
Newly designed crank mechanism – the crank mechanism in the DJR187 has been redesign to rotate vertically instead of horizontally like our previous recipro saws. This provides less vibration to the user
XPT – eXtreme Protection Technology – increased resistance to dust and small amounts of water
Specifications:
Voltage: 18V
Capacities:
Wood: 255mm
Pipe diameter: 130mm
Length of stroke: 32mm
Strokes per minute:
Hi: 0-3000spm
Lo: 0-2300spm
Length: 439mm
Weight: 3.5kg
Makita DMR115 18V Li-ion Cordless Digital Bluetooth Jobsite Radio
The DMR115 delivers great sound in a compact size, and is equipped with Digital DAB+ radio and Bluetooth to wirelessly connect your mobile device to play music. It has one auxiliary port for MP3 compatibility, and delivers rich stereo sound from two powerful 3" side - firing speakers and a powerful 25W subwoofer. The DMR115 is engineered to stand up against harsh job site conditions with protective bumpers, and features dust and water resistant construction for increased durability, giving it an IP65 rating.
Features:
High quality sound produced by 2 stereo speakers and subwoofer
Digital radio and Bluetooth for streaming audio
Highly durable design with IP65 rating ideal for jobsite conditions
USB port 2.4A for charging mobile devices
FM antenna built in to the handle design* (*AM Broadcasting not supported)
Specifications:
Voltage: 18V
Frequency band: 87.5 - 108 FM or DAB+
Bluetooth Range:
Max. 30m
Optimum 10m
Length: 286mm
Weight: 5.5kg
Warranty:
3 Years Warranty Covered By Makita Australia
Makita DKP181Z 18V Li-ion Cordless Brushless AWS Planer - Skin Only
The Makita 18V AWS Planer, DKP181Z, delivers heavy duty cutting performance with a high powered Brushless Motor, allowing a massive 3mm max. cutting depth. Coupled with Automatic Torque Drive technology the planer automatically adjusts speed and torque depending on the load conditions for optimal cutting. Also featuring an electric brake and a foot on the base plate, increasing safety and protecting workpieces from any possible damage.
The DKP181Z features AWS technology, enabling wireless connection to a compatible Bluetooth vacuum for on demand dust extraction, providing a cleaner and safer work environment. Please note, the AWS reciever is sold seperatly.
Includes:
1 x Guide rule assembly (122785-9)
1 x Blade gauge assembly (123062-2)
1 x Socket wrench 9 (782209-3)
1 x Depth gauge (342390-8)
Features:
High powered brushless motor allows up to a maximum 3mm cutting depth
Housing design has been re-engineered to allow for up to a 25mm shiplapping cuts
3 chamfering grooves allow easy chamfering by aligning the groove with the edge of the workpiece. 3 different size grooves allow for different groove dimensions
Electric blade brake allows the blade rapidly stops after the trigger has been released. Preventing user injury or damage to the workpiece
Automatic torque Driver Technology (ADT) automatically changes the cutting speed according to the load conditions for optimum operation
Auto-start Wireless System (AWS) with wireless unit (sold seperatly), wireless connection can be made between the tool and an AWS supported vacuum for wirelessly enabling the vacuum to operate when the tools trigger is engaged
Left & right chip ejection easily divert the wood chips either left or right by adjusting the ejection cover plate to the preferred side
Foot on base plate protects the workpiece from scratches and damage by raising the base off the work material when not in operation
Specifications:
Voltage: 18V
No load speed: 12,000rpm
Planning width: 82mm
Planning depth: 3mm
Shiplapping/rebate: 25mm
Noise: 84dB(A)
Vibration: 5.0m/s²
Length: 366mm
Weight: 3kg
Warranty:
3 Years Warranty Covered By Makita Australia
Makita DTM52ZX3 18V Li-ion Cordless Brushless Multi Tool - Skin Only
The Makita 18V LXT Brushless Multi-Tool (DTM52) delivers more power and less vibration than ever before. The DTM52 is engineered with premium features like AVT for reduced vibration and lower noise. While the new STARLOCK Max accessory mount system provides improved performance, ideal for cutting, sanding, scraping, grout removal, and more.
The DTM52 delivers increased cutting efficiency with an improved oscillation angle of 3.6°engineered for faster, more aggressive cutting and sanding. The variable speed control dial (6,000 –20,000 OPM) and soft start feature enable the user to match the speed to the application with more control.The DTM52 is engineered for a range of applications including cutting, sanding, scraping, grout removal, and more. It is ideal for builders, carpenters, plumbers, wood floor installers, and general trades seeking a best-in-class cordless multi-tool.
Features:
Compatible with StarlockMax accessories for heavy duty applications. StarlockMax blades have larger cutting capacities for deeper cutting and transfer more power for applications like cutting rebar
Tool-less Accessory Change - quick and easy blade changes by opening the lock lever removing the bolt install the accessory replace the bolt and close the lever lock
Soft Start reduces the initial start up shock and allows the user to accurately land the blade on the workpiece
3.6° Oscillation Angle provides high operating efficiency thanks to the large oscillating angle and constant speed control. Larger angle allows for faster and more aggressive cutting
Variable speed control dial allows the user to adjust the speed to suit the application. Variable between 6,000 and 20,000opm
Anti-Vibration Technology (AVT) significantly lowers vibration than any other tool on the market. Due to a redesigned housing structure the DTM52 produces vibration of only 2.5m/s²
eXtremeProtection Technology (XPT) improved protection against dust & moisture even in the harshest jobsite conditions, increasing durability
Small Grip Diameter - the motor has been relocated to the front end of the body allowing for a slimmer grip design. The grip circumference is only 169mm significantly smaller than competitors making the tool extremely comfortable to use
Specifications:
Voltage: 18V
Oscillation angle left/right: 1.6° (3.2° total)
Oscillation per minute: 6000 - 20,000opm
Vibration: 2.5 m/s²
Length: 322mm
Weight: 1.4kg
Warranty:
3 Years Warranty covered by Makita Australia
Makita DBO180Z 18V LXT Li-Ion Cordless Random Orbital Sander - Skin Only
Includes:
1 x Abrasive disc
1 x Dust box
Features:
Push button control with on/off and high/medium/low speeds
Compact design with lower centre of gravity for easier handling
High orbital speed up to 11,000opm with 2.8mm orbit diameter
Pad brake prevents aggressive sanding on first contact
Hook & loop paper fastening system
Specifications:
Voltage: 18V
Abrasive Paper Size: 125mm
Pad Size: 123mm
Orbits Per Minute:
Low: 7000opm
Med: 9500opm
High: 11,000opm
Sanding Strokes:
Low: 14,000spm
Med: 19,000spm
High: 22,000spm
Length: 175mm
Weight: 1.7kg
Warranty:
3 Years Warranty Covered By Makita Australia
Makita DVC750LZX1 18V Li-Ion Cordless Brushless Wet/Dry Dust Extractor
The DVC750LZX1 is designed as a lightweight, compact dust extractor providing powerful suction for a range of wet and dry applications. The HEPA filter ensures a high filtration rate and 2 stage suction control provides optimum runtime and power.
Includes:
Hose
Crevice Nozzle
Flat Nozzle
Shoulder Strap
Features:
2 Stage power selection for optimum suction performance
7.5L Tank capacity with HEPA filter
6.7kPa Max sealed air suction
Compact and lightweight at 4.6kg with battery
Up to 35 minutes runtime on high power selection
Specifications:
Max sealed suction: 6.7kPa
Max air volume: 1.8 m3/min
Tank capacity: 7.5L
Suction power: 55W
Length: 418mm
Voltage: 18V
Weight: 4Kg
Warranty:
3 Year Warranty Covered By Makita Australia
Makita DJV182Z 18V Li-ion Cordless Brushless Jigsaw With Top Handle - Skin Only
Includes:
6 x Piece Jigsaw Blade Set
1 x Anti-Splitering Device (192557-6)
1 x Cover Plate (417852-6)
1 x Hew Wrench (783202-0)
Features:
Powerful Brushless DC (BLDC) motor
D-handle design
Trigger switch with lock-on button
Tool-less blade clamp for easy blade attachment and removal
Variable speed control by dial
Rigid aluminium base bevels 0° to 45° left and right
3 orbital settings + straight cutting
Soft start allows for accurate landing of the blade on the surface of the workpiece
Soft no load speed
Blower function keeps the cutting line clean
Twin LED job light
Ergonomically designed handle with soft grip
Cover plate protects the workpiece from scratches
Ergonomically designed handle with soft grip
Dust nozzle can be attached for connection to Makita vacuum cleaner (sold seperatly)
Specifications:
Voltage: 18V
Length of Stroke: 26mm
Strokes Per Minute: 800-3,500spm
Max. Cutting Capacity:
Aluminium: 20mm
Steel: 10mm
Wood: 135mm
Weight: 2.6kg
Overall Length: 266mm
Makita DML802 14.4 - 18V LXT Li-Ion Rechargeable Cordless LED Torch Skin Only
Features :
Long continuous illumination of 13 hourswith a fully charged 18V-3.0Ah battery BL1830(not included)
Strap hook -can be installed on the upper or lower position in accordance with usage
12 position pivoting flashlight head - positive stops at 110°, 90°, 75°, 60°, 45°, 30°, 15°, 0°, -15°, -30°, -45°,-60°
Compact size aluminium flashlight head
Ergonomically designed handle with rubberised soft grip
Multi-faceted reflector controls the direction and spread of light from LED to provide a sharp round spot light with uniform high brightness
On/off switch
Specifications :
Voltage : 14.4v & 18v
Head Pivoting Positions : 12
Light Source Type : 3.2W single LED
Light Source Illuminance : 4,000lx
Light Source Luminous flux : 160lm
Light Source Service life : 50,000hours or more
Operating time max : 13/9 h
Dimensions (L x W x H) : 256 x 79 x 99 mm
Net weight : 0.65 kg
Included :
Strap Hook
Makita DC18RD 18V Li-Ion Cordless Battery Same Time Dual Port Charger
The Makita DC18RD chargers two batteries at a time, making it a vital part of any jobsite or busy home workshop. The most asekd question we recieve is how long it takes to charge batteries? The Makita DC18RD charge time depends on the amperage of the batteries; so below we have listed the charge times:
Two - BL1815 18V Makita 1.5Ah Batteries: 30 minutes + Universal USB port for charging mobile phones, iPads, ect
Two - BL1830 18V Makita 3.0Ah Batteries: 22 minutes + Universal USB port for charging mobile phones, iPads, ect
Two - BL1840 18V Makita 4.0Ah Batteries: 36 minutes + Universal USB port for charging mobile phones, iPads, ect
Two - BL1850 18V Makita 5.0Ah Batteries: 45 minutes + Universal USB port for charging mobile phones, iPads, ect
Features:
Fast charging - charges 2 x 3.0Ah Lithium-Ion batteries at the same time in only 22 minutes
Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
Forced air cooling fan - cools the battery to minimise charging time
LED charging display
Full charge sound alert
USB port provides 1.5A output for charging smart phones, tablets, etc
Specifications:
Voltage: 18V
Cell Capacity: 1.5 - 5.0Ah
Charge Time:
1.5Ah: 15mins
3.0Ah: 22mins
4.0Ah: 36mins
5.0Ah: 45mins
Weight 1.9kg
Overall Length: 200mm
Makita BL1860B-L 18V 6.0Ah Li-ion Cordless Battery with Gauge
The Makita 18V LXT Li-ion 6.0Ah battery, BL1860B-L, charges faster and works longer than standard Li-ion batteries, giving you and your cordless tools unmatched performance and productivity to take on the most demanding applications.
The Makita 6.0Ah battery combines more run time (100% more run time per charge than the Makita BL1830 3.0Ah battery) with a category-leading charge time of only 60 minutes, so it spends more time working and less time sitting on the charger. For added convenience, it also features an L.E.D. charge level indicator to monitor battery charge. The BL1860B-L resists self-discharge so it is ready for use even after long periods of little to no useage.
Features:
Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
Up to 100% more run time per charge compared to BL1830
Fast 60 minute charging time
Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
Battery resists self-discharge and remains ready for use even after long periods of storage
Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
Star protection computer controls - includes overload protection, over-discharge protection and over heat protection
The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating
Specifications:
Voltage: 18V
Amp hour: 6.0Ah
Cell type: Lithium-Ion
Charging time: 60 minutes
Weight: 0.6kg
Makita 199936-9 600mm Large Cordless Tools Duffel Carry Bag LXT401
Features:
Heavy duty tool bag made with weather resistant, durable nylon cordura construction
Plastic skids on bottom of bag for increased durability and wear protection
Internal Pockets feature straps to retain tools during transit
External pockets enable storage of accessories smaller objects
Padding throughout bag
Specifications:
Height: 300mm
length: 600mm
Width: 375mm |
|
|
|
Product Image
|
